If you are a Lionel trains enthusiast, repairing and servicing your Lionel trains is a regular part of your hobby. You want to keep your trains looking sharp and working well for the most enjoyment. If you intend to sell your trains, then keeping them at their best is a key to receiving a great price. Most Lionel train repairs can be done right there in your own home. If you do the repairs yourself, you can save money on repair bills, and enjoy the satisfaction of keeping those beauties looking great!
Here are some tips for some of the most common Lionel train repairs:
If your train seems to be lagging, the reason is probably because there is some dirt, rust, or oil build up on either the track or the wheels of the train. These build ups can affect the connection between the track and the train. If there is not a good connection, then it doesn’t run as well.
Cleaning Debris From The Track and Wheels
If you see some rust, use some sand paper to remove it. If there is severe build up, you can use a utility knife to scrape off the largest part of it. Alternatively, you can use rust remover. After you remove the rust, saturate a soft cloth with light oil spray, and rub the track with it. Then buff it with a clean part of the cloth.
If you see some greenish or crusty white build up, this is oxidation. Simply soak your track in oxidation remover for a few minutes, and then follow up with the light oil spray and buffing.
Be sure you do not ever use steel wool on your tracks. Little particles of the steel wool will come off and then stick to the track. These particles will get picked up by your locomotive, and could cause enough damage to ruin it.
If you have some stubborn spots of grime, a hard eraser will eliminate them.
Follow the same procedure for the wheels, but a Q-Tip soaked with the oil spray works better for cleaning the dirt from them.
Repairing The Track Pieces So They Fit Together Snugly
Another one of your common Lionel train repairs is getting the pieces of your track to fit tightly together. Over time, the connectors tend to become slightly bent, loosening up the connections. When you encounter this problem, use needle nose pliers to carefully bend the connectors back into place. When you have them back where they should be, your track pieces will fit snugly together again.
Repairing The Cars
Keeping your cars in tip top shape is also important. Dirt and oil can build up in these also. Use the light oil spray to clean them. If you need to apply some oil to small moving parts, use a toothpick to transfer a small drop of oil to where you need it. You don’t want to overdo it in applying the oil.
Once your car is clean, check it for bent or broken pieces. If something is bent, you may be able to use needle-nose pliers to gently guide it back.
Most of the time you can replace any parts that need replacing yourself. Usually they are attached with small screws. Simply unscrew the part and screw the new part into place.
Where Do You Find Replacement Parts?
You can find replacement parts to complete your Lionel train repairs at your local hobby shop or specialty Lionel stores.